PRODUCT

----------

All categories



Mixer

0421-3399078 0421-3398828

0.0 元 ~~0.0 元~~

Classification: Steelworks Pelletizing Equipment



1

Product introduction

Product Introduction

Cylinder mixer is one of the main equipment in sintering plant. The primary mixer is to mix and moisten the powder, concentrate, fuel and solvent before sintering. The secondary mixer is mainly used to granulate the material to make the material uniform, moderate moisture and good air permeability. It can also be used for mixing other metallurgical industry and powder materials. The cylinder length of the machine can be made according to customer demand. The drive form can be divided into gear drive and rubber wheel drive.

Technical Parameter

Product name	Specification	Design capacity (t/h)	Main technical parameter


Mixer	φ2.2×7m	100	Angle of inclination 2°、Rotate speed of cylinder 0.73-7.3r/min、Module number 22、Gears number Z1=23 Z2=146、Drive ratio of gear 6.35
Mixer	φ2.2×9m	120	Angle of inclination 2°、Rotate speed of cylinder 0.83-8.3r/min、Module number22、Gears numberZ1=23 Z2=146、Drive ratio of gear 6.35
Mixer	φ2.8×6m	170-290	Bulk gravity 1.7±0.1、Angle of repose 35°、Filling rate 12.5-15.1%、Angle of inclination1.6°、Rotate speed of cylinder 7.3rpm、Mixing time 70sec、Feeding volume of mixer 4m3/h、Pressure of feeding water 0.3-0.4Mpa、Open type, Drive ratio of gear 146/27
Mixer	φ2.8×7m	380	Angle of inclination 2°、Rotate speed of cylinder 7.4rpm、Module number28、Gears numberZ1=17 、Z2=160、Drive ratio of gear 9.412
Mixer	φ3×9m	440	Angle of inclination 2°、Supporting number 2、Rotate speed of cylinder 6.9rpm、Module number28、Gears numberZ1=17 Z2=172、Drive ratio of gear10.11
Mixer	φ3×10m	300-320	Angle of inclination 2° Rotate speed of cylinder 6.5rpm
Mixer	φ3.2×13m	320-350	Angle of inclination 1.5° Rotate speed of cylinder 6.9rpm
Mixer	φ3.4×13m	520-600	Angle of inclination 2.2° Rotate speed of cylinder 7rpm
Mixer	φ3.5×16m	420	Angle of inclination 1.5°、Filling rate 14.4%、Rotate speed of cylinder 6.4rpm、Mixing time 5min、Module number32、Gears numberZ1=21、 Z2=176、Drive ratio of gear8.38
Mixer	φ3.8×14m	880-950	Angle of inclination 2.5° Rotate speed of cylinder 6rpm
Mixer	φ4.0×18m	420-500	Angle of inclination 1.8° Rotate speed of cylinder 4.7rpm
Mixer	φ4.4×18m	880-950	Angle of inclination 2° Rotate speed of cylinder 6rpm

新闻中心

Customer service

Customer service hotline

18242194821 18242194821

Service time:

8:00 - 17:00

Customer service group:

在线客服

微信:

WeChat

Chaoyang Jiantou Heavy Machinery Co., Ltd

Address: Yulong Avenue, Shuangta District, Chaoyang City, Liaoning Province, China

Tel: 0421-3399078 0421-3398828 18242194821

Fax: 0421-3398828

Mail: wangdan0832@163.com Postal Code: 122000

辽ICP备19017341号-1 Website construction：www.300.cn jinzhou.300.cn